turbojay240z
Techy
Posts : 184
Join date : 2008-10-24
Age : 47
Location : Greeneville, TN.
 | | Subject: 5 Lug Swap Parts... Thu Mar 26, 2009 5:25 pm | |
| 5 lug rear hubs... [ 300zx aluminum uprights and S14 spindles (only one shown, but i have both)... 300zx rear shocks (must use when using the aluminum uprights) KYB GR2's.... PM me if interested and make me an offer 
Last edited by turbojay240z on Fri Nov 20, 2009 5:08 pm; edited 1 time in total | |
|
240sRus
Administrator
Posts : 566
Join date : 2008-10-22
Age : 31
Location : Underground, AL.
| | Subject: Re: 5 Lug Swap Parts... Fri Mar 27, 2009 10:26 am | |
| Me want!!!
What all is missing?
I know you can just take your rotors to a shop and they'll drill them out from 4 to 5. | |
|
turbojay240z
Techy
Posts : 184
Join date : 2008-10-24
Age : 47
Location : Greeneville, TN.
| | Subject: Re: 5 Lug Swap Parts... Fri Mar 27, 2009 8:31 pm | |
| - 240sRus wrote:
What all is missing?
I know you can just take your rotors to a shop and they'll drill them out from 4 to 5. To swap to 5 lug with this stuff, you would need s14 front ball joints, and drilled rotors or s14 rotors and calipers. The mounting holes on the s14 spindles uses M14 bolts vs. M12 on the s13 spindles, so you would have to either use s14 struts, drill out the holes on the s13 struts, or buy sleeves that slide in the holes on the s14 spindle. The aluminum uprights can be swapped in with no mods, you just have to use the 300z shocks and stock 240 dust shield, unless you use the 300z rear calipers, then you use the 300z dust shield. I hope that answered your question.  What's up with my avatar? | |
|
k-town-ka-t
Jr. Member
Posts : 52
Join date : 2009-01-08
Location : Knoxville, TN.
| | Subject: Re: 5 Lug Swap Parts... Wed Apr 01, 2009 4:54 pm | |
| pm me with a price on just the stuff for a 5 lug swap....i hate my racing addiction and so does my wallet  | |
|
Sponsored content
| | Subject: Re: 5 Lug Swap Parts... | |
| |
|
